Got an idea? Let's Kreate it.
Holley EFI tuning, custom fabrication, and 3D-printed parts for project cars. Based in Waterloo, Iowa.
Got a project car that needs custom work or some new part you want designed/built? I'll come out, look at what you're building, and give you a quote.
What the $40 covers: me visiting to look over your project and price the work. If you go ahead, the $40 is credited toward your final quote.
Best fit: Pro street and drag cars are my focus, but I'm open to other projects too. Non Automotive projects as well just are not my specialty.
Custom work I can help with
Welding: MIG and TIG
Roll cage work: tube bending and modifying
Custom brackets: steel, aluminum, and other materials
3D-printed parts: custom plastic parts in a variety of plastics and colors
Performance installs: aftermarket performance parts, professionally installed
Rear-end housing shortening
Don't see what you need? Ask. If it's fabrication or a custom part, there's a good chance I can help.
How it works
Book your consultation.
I look over your project and we talk through what you want done.
You get a quote. [1-2 days]
If you approve it, we schedule the work and the $40 comes off your total.
Questions before booking? Call (515) 657-7644 or send a message.
Our Services
Professional tuning for Holley EFI systems (Stealth, Terminator X/Xmax, HP, and Dominator) without dropping your car off.
How it works
Book your tune.
I send you instructions for how to drive the car to capture a good data log.
You record the log and send it to me. I can walk you through setting up logging, but you'll need some basic computer knowledge.
I review your data and [send back your updated tune file, typical turnaround: 2-4 days].
What's included: Multiple revisions, support by email
What you'll need: a Holley EFI system (Stealth, Terminator X/Xmax, HP, and Dominator), a laptop for data logging and programming, and a car that runs and can be driven safely.
Not sure if this is right for you? Call (515) 657-7644 or send a message before booking.
In-person tuning for cars with Holley EFI (Stealth, Terminator X/Xmax, HP, and Dominator), done at my shop in Waterloo, Iowa.
What to know before booking
The car needs to be dropped off and be able to be driven, since the tune is done on the road. (Additional mechanical work needed will be charged at an hourly rate TBD)
Time will depend on any additional work needed or weather but typical 1-3 days
What's included: Final Tune file programmed on ECU already as well as email of the file use
Questions? Call (515) 657-7644 or email us.
Featured Products
Fits: Dual Mac valve setups with a T in the middle, the common twin turbo layout
Material: ASA plastic
Included: two-piece holder (mount and removable front cover)
Not included: top screw, Deutsch connectors, Mac valves and related pieces
Mounts with four bolts through the corner holes and protects the solenoids in the engine bay. The front cover comes off, with one optional screw on top, so you can adjust or replace the valves easily. The lower section holds a 4-pin female Deutsch connector for each plug, so unplugging from your harness is simple.
*Screw for top, deutsch connector & mac valves / pieces for them not included
Fits: Klein square digital angle gauge (gauge not included)
Material: ASA plastic
Included: 3-piece holder with a bolt-on front cover and a universal round-tube bottom adapter
Protects your gauge and lets you mount it perpendicular to the part you're measuring. It's ideal for roll cage work where you twist the tube for an offset bend and need the angle right. The bottom adapter fits a variety of material and is replaceable, and I'll be releasing other ends for it.
Fits: Gen 3 Hemi, mounting at the front timing cover where the A/C pump normally goes
Also fits: B-body Mopar with Holley engine mounts (requires some trimming of the stock K-frame steering box braces)
Made for: GM 1-wire alternator (not included)
Material: Aluminum, powder coated
Includes adjustment for both belt tension and belt alignment. Other applications may vary depending on alternator size and engine position, so message me before ordering if you're unsure it will fit.
Follow us on social
About
the company
Newly started in 2024 in Waterloo Iowa. I created this company to provide a service to tune cars with Holley EFI as well as other EFI systems. We also do custom automotive work for you project vehicle that includes designing and making new and unique parts. Mopar vehicles and engines is what I specialize in but not limited to. Currently in process of a variety of new parts to release and looking to specialize in more drag & drive projects and custom parts.
Contact Us
Interested in working together? Fill out some info and we will be in touch shortly. We can’t wait to hear from you!